[visionviper]

Everyone: I received this from my Tech at Infiniti. Attached is the Infiniti Accessory Harness wiring diagram and where the Illuminated Kick Plate Kit taps into. You can use the wires to power up your accessories. Reminder, use a different ground (direct to body) otherwise the black ground in the accessory kit will detect an resistance impedance drop.
Location of the connector plug is in the footwell (same location on Driver side as well as passenger side). If you do not have the illuminated Kick Plate, you can buy the Accessory Harness for $15 from any Infiniti dealer . Here is an example, with the part number etc. T99F6-4RA0A - Accessory Service Connector - Genuine Infiniti Accessory

View attachment 6924

This is what I did for mine. I used posi-taps and wired in one of those tiny 12v to 5v converters off eBay and then ran a nice Anker USB-A to USB-C cable all the way up the A-pillar, under the headliner, and into under the middle cover. The wire comes out the same exact place the wires for the mirror comes out. Since I had the illuminated kick plates it was super easy.

 

[asatar2]

I used the Nissan/Infiniti accessory connector on the passenger side, used Inifiniti/Nissan OEM camera which is not the best but wanted something that is easy to install. The kit comes with the camera includes all the cables, plastic parts, clips, etc to do the installation. However the accessory connector has to be bought separately ($10-$15). The camera works well, however max recording time is 30 minutes only and you cannot install a bigger SD card! Also the parking mode works randomly sometimes it works other times the car shuts it down due to low battery voltage. Now in the summer it works great most of the time. Not sure why, but overall I am satisfied with the installation, you can buy the accessories connector and a different camera, however you need to figure out the wires mapping (available online)

 

[brobin]

I moved the dashcam from my old car to my 2024 QX60 and wired it to the back of the rear view mirror using this plug 'n play adapter from Amazon:

Amazon.com: Dash cam Power Adapter for Nissan Infiniti Subaru Mazda 2012+ with auto-dimming,10pin Socket,USB Power Source from Rearview Mirror,Plug and Play : Electronics

Amazon.com: Dash cam Power Adapter for Nissan Infiniti Subaru Mazda 2012+ with auto-dimming,10pin Socket,USB Power Source from Rearview Mirror,Plug and Play : Electronics

www.amazon.com

Only took a minute or two to install.

 

[yeller]

I moved the dashcam from my old car to my 2024 QX80 and wired it to the back of the rear view mirror using this plug 'n play adapter from Amazon:

Amazon.com: Dash cam Power Adapter for Nissan Infiniti Subaru Mazda 2012+ with auto-dimming,10pin Socket,USB Power Source from Rearview Mirror,Plug and Play : Electronics

Amazon.com: Dash cam Power Adapter for Nissan Infiniti Subaru Mazda 2012+ with auto-dimming,10pin Socket,USB Power Source from Rearview Mirror,Plug and Play : Electronics

www.amazon.com

Only took a minute or two to install.

Hey Brobin, I don't see a clip behind my 2023 QX60 rearview mirror. Does yours look like this? I wonder if the clip is behind some of the plastic.

Not sure if it matters, but my mirror is a rearview monitor/camera.

 

[brobin]

My 2024 has this connector right on the back of the mirror.

 

[yeller]

My 2024 has this connector right on the back of the mirror. View attachment 6986

That's really strange, why would they have different rearview mirrors? Does yours have the rearview camera or is it just regular mirror?

 

[brobin]

I have the rear view and surround view cameras displaying on the screen, not in the mirror itself so I guess that's a regular mirror with just auto-dimming and garage door buttons. That would explain the difference.

 

[AutographGM]

I am looking for the same solution. Have the 2024 QX60 Autograph. At the dealer now to get some accessories installed. Pass thru lighting, LED emblem, mud flaps etc. Asked if there is a connector harness that can plug in from the digital rear view (or same area) as an accessory to run a dash cam. They are researching. There must be one as they sell a dash cam as an accessory!

 

[imnovidiot]

I am looking for the same solution. Have the 2024 QX60 Autograph. At the dealer now to get some accessories installed. Pass thru lighting, LED emblem, mud flaps etc. Asked if there is a connector harness that can plug in from the digital rear view (or same area) as an accessory to run a dash cam. They are researching. There must be one as they sell a dash cam as an accessory!

Take a look at this one at Amazon. Your connector must be 10 pin plus it has a feed through for the auto wipers. https://www.amazon.com/gp/product/B0CR5LN8XL/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

 

[3rdQX]

Is this the plug I should use for the connector plug for the dashcam? This is from a 2023 QX60 Autograph mirror (with screen) and its located under the plastic cover by the mirror.

 

[yeller]

View attachment 7113


Looks like it. Thanks for pulling the plastic apart and taking pics of the internals.

Is this the plug I should use for the connector plug for the dashcam? This is from a 2023 QX60 Autograph mirror (with screen) and its located under the plastic cover by the mirror.

 

[superjer2000]

View attachment 7112 View attachment 7113

Is this the plug I should use for the connector plug for the dashcam? This is from a 2023 QX60 Autograph mirror (with screen) and its located under the plastic cover by the mirror.

That's awesome!!! How did you get the cover off? If I get it off this weekend I'll come back with the correct wires to plug into. I had tried pulling mine off ages ago, couldn't get it and never got back to it.

 

[Tracy]

did you make it work with this plug?

 

[Tracy]

That's awesome!!! How did you get the cover off? If I get it off this weekend I'll come back with the correct wires to plug into. I had tried pulling mine off ages ago, couldn't get it and never got back to it.

Did you make it work?

 

[Tracy]

Take a look at this one at Amazon. Your connector must be 10 pin plus it has a feed through for the auto wipers. https://www.amazon.com/gp/product/B0CR5LN8XL/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

I can confirm this adapter from Amazon does not fit 2024 QX60 Sensory. I bought it and returned it. I didn't find any other adapter which works with the 2024 QX60.

 

[3rdQX]

I bought a 12-pol plug but it was not for the QX60 so the poling/wiring is different. I plan on trying to figure out which color will be the + and - (all different colors coming from the car 😩) but for now I wired to the USB at the cell-charger -it actually looks pretty good and I I even got the wire behind the airbag 😊.

 

[jjoker13]

I recently installed the OEM dual drive camera in my 2024 QX60 Autograph. The dealer was going to charge $1000+ for the installation which is pretty crazy. I was lucky i guess that i caught them on a busy day as it sounded like they didn't want to do the install. I asked for the installation instructions and they printed them out for me. Attached is a scanned copy of the instructions. Super easy to follow and took me less than an hour to hook everything up. The dual drive camera works but seems very antiquated. Wish i purchased another dash cam. I will use it for now and most likely replace it later down the road. I will reuse the power, ground, and ign wires i ran for this camera to the accessory cable on the front passenger side. If your vehicle has the illuminated kick plates then it already has the accessory cable. Otherwise will need to purchase the accessory cable to install. Can find them online at Amazon for around $15.

 

[yeller]

I recently installed the OEM dual drive camera in my 2024 QX60 Autograph….

This is amazing, thank you!

I wish manufactures freely published these types of guides. I don’t understand why you have to “beg” a dealership for printouts or buy them online.