Infiniti QX60 Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
67 Posts
Discussion Starter #1
My QX60 did not come with rails/crossbars. Anyone know if these items can be added now and if so, how much this would run? I want to add a Yakima Skybox or Thule box, but it does not appear that I can do so with my current vehicle configuration (unless I'm not navigating their websites properly).
 

·
Registered
Joined
·
169 Posts
I remembered them being cheaper.

But according to my dealer's parts website the roof rails are $450 while the cross bars are $275. both say each but I think it's just 1 set.

You can see other websites are lower in price. $378 and $231 respectively. The part number for the roof rails are unique depending on the color of your vehicle. the cross bars part number is 999R1-RZ500
Just be weary of the site you purchase from. I'm not endorsing any of the sites below.
Infiniti parts

Infiniti parts

https://discountinfinitiparts.com/partlocator/index.cfm?action=viewPrintablePage&partid=1120310&siteid=215255&catalogid=5508
 

·
Registered
Joined
·
67 Posts
Discussion Starter #3
I remembered them being cheaper.

But according to my dealer's parts website the roof rails are $450 while the cross bars are $275. both say each but I think it's just 1 set.

You can see other websites are lower in price. $378 and $231 respectively. The part number for the roof rails are unique depending on the color of your vehicle. the cross bars part number is 999R1-RZ500
Just be weary of the site you purchase from. I'm not endorsing any of the sites below.
Infiniti parts

Infiniti parts

https://discountinfinitiparts.com/partlocator/index.cfm?action=viewPrintablePage&partid=1120310&siteid=215255&catalogid=5508
thank you for this.
 

·
Registered
Joined
·
2 Posts
Has anybody tried attaching Yakima towers to the QX60 factory roof rails? I just bought the QX and am trying to figure out if my old Yakima towers will fit.

If Yakima towers don't fit, are there any Thule or other brands that can attach to the factory roof rails?
 

·
Registered
Joined
·
597 Posts
Has anybody tried attaching Yakima towers to the QX60 factory roof rails? I just bought the QX and am trying to figure out if my old Yakima towers will fit.

If Yakima towers don't fit, are there any Thule or other brands that can attach to the factory roof rails?
The QX rails don't have space underneath so the towers won't properly connect. You may be able to use a landing pad and skip the rails all together.
 

·
Premium Member
Joined
·
539 Posts
Aftermarket towers won't fit on QX60 rails. As an alternative, I strongly suspect that the Pathfinder rails would fit on the QX60 (I have not tried this - YMMV). If they do, you could clamp yakima or thule x-bars to the PF rails (theirs are raised).

There will be labor involved in mounting roof rails. x-bars can be done yourself with the included star wrench.
 
1 - 6 of 6 Posts
Top