QX60/JX35 washer pump replacement congratulation u finally found one !
My wife told me during winter time that no water coming to my windshield for both real and front
I spent some time re-searching forum ( yaa nothing FTW noone has washer pump failure ?? ) so it took me some time to fix it myself
Here is the story :
1.There are 2 fuses u will need to check , one is inside engine and one is in salon
Google and u will find them or just look for fused under washer motor name
In my case all 2 fused were OK so i started to dig dipper into washer pump.
2. Washer pump location is on the right site near the right wheel.
U will need to raise u car and remove right wheel.
Then u will need to remove the fender cover . I didnt remove entire cover as u will see on attached pictures .
I only released and pushed up the lower part of cover to have enough space to reach my washer pump .
Remove washer pump and test it with 12v small battery ,- my was dead , cool i found the problem
3. Ok after digging down your problem to the washer pump u will think what the deal , just get on ebay one for $20 and u are done ... WRONG ..
These M.F. infiniti engineers ( i have no other words sorry ) probably think that who ever buy infiniti didnt pay them enough ,- u can NOT find the pump number anywhere
( see picture ) , the only replacement they have is ENTIRE washer module with tank, cables, washer pump , yadda , yadda , like $170-$200,- what the crap its just washer pump no ???
long story short i end up with aftemarket washer pump .
U will need a double front / end terminal connections for single washer pump .
They call it : 2-Way Washer Pump Controls Both The Front & Back Washers;
This is because one pump work for both front and real , u just change polarities +/- to -/+ on a pump and it starts pumping in other direction
U will need same size for 2 front end houses and one big which need to be plugged into washer tank .
U will need same body size to plug into the same space build into washer tank . The wire harness is the only peace which u can rebuild , all the rest should match .
After some research i end up with Trico washer pump Part #11-529 , - worked great for all dimensions except of wire harness but its not cheap like $45.
Sorry cant post picture due to stupid restriction below
To be able to post links or images your post count must be greater.